Ich verstehe das nicht.
C:\Users\hackwienix\Desktop>java -cp ZtexBTCMiner-120417.jar BTCMiner -host http
://pool.50btc.com:8332 -u worker -p irgendwas
MAC address: 0004a36e2d07
ztex_ufm1_15y1-04A36E2D07: New device: bitfile=ztex_ufm1_15y1 f_default=200,00
MHz f_max=240,00MHz HpC=1.0H
ztex_ufm1_15y1-04A36E2D07: FPGA 1: configuration time: 302 ms
ztex_ufm1_15y1-04A36E2D07: FPGA 2: configuration time: 305 ms
ztex_ufm1_15y1-04A36E2D07: FPGA 3: configuration time: 308 ms
ztex_ufm1_15y1-04A36E2D07: FPGA 4: configuration time: 305 ms
ztex_ufm1_15y1-04A36E2D07-1: New FPGA
ztex_ufm1_15y1-04A36E2D07-1: Set frequency to 200,00MHz
ztex_ufm1_15y1-04A36E2D07-2: New FPGA
ztex_ufm1_15y1-04A36E2D07-2: Set frequency to 200,00MHz
ztex_ufm1_15y1-04A36E2D07-3: New FPGA
ztex_ufm1_15y1-04A36E2D07-3: Set frequency to 200,00MHz
ztex_ufm1_15y1-04A36E2D07-4: New FPGA
ztex_ufm1_15y1-04A36E2D07-4: Set frequency to 200,00MHz
A multi-FPGA board is detected. Use the cluster mode for additional statistics.
Disconnect device or press Ctrl-C for exit
ztex_ufm1_15y1-04A36E2D07-4: Using LongPolling URL
http://pool.50btc.com:8332/LP/
Warning (try 1): libusb0-dll:err [control_msg] sending control message failed, w
in error: Das Gerõt erkennt den Befehl nicht.
ztex_ufm1_15y1-04A36E2D07-3: Error: bus=bus-0 device=\\.\libusb0-0001--0x221a-0
x0100: selectFPGA: libusb0-dll:err [control_msg] sending control message failed,
win error: Das Gerõt erkennt den Befehl nicht.
: Disabling device
Warning (try 1): libusb0-dll:err [control_msg] sending control message failed, w
in error: Das Gerõt erkennt den Befehl nicht.
ztex_ufm1_15y1-04A36E2D07-2: Error: bus=bus-0 device=\\.\libusb0-0001--0x221a-0
x0100: selectFPGA: libusb0-dll:err [control_msg] sending control message failed,
win error: Das Gerõt erkennt den Befehl nicht.
: Disabling device
Warning (try 1): libusb0-dll:err [control_msg] sending control message failed, w
in error: Das Gerõt erkennt den Befehl nicht.
ztex_ufm1_15y1-04A36E2D07-1: Error: bus=bus-0 device=\\.\libusb0-0001--0x221a-0
x0100: selectFPGA: libusb0-dll:err [control_msg] sending control message failed,
win error: Das Gerõt erkennt den Befehl nicht.
: Disabling device
Warning (try 1): libusb0-dll:err [control_msg] sending control message failed, w
in error: Das Gerõt erkennt den Befehl nicht.
ztex_ufm1_15y1-04A36E2D07-4: Error: bus=bus-0 device=\\.\libusb0-0001--0x221a-0
x0100: selectFPGA: libusb0-dll:err [control_msg] sending control message failed,
win error: Das Gerõt erkennt den Befehl nicht.
: Disabling device