Post
Topic
Board Hardware
Re: AMT 1.2THs miner first impressions/review (WIP)
by
grimbit
on 12/01/2015, 08:46:00 UTC
Hi. where can I get the img file firmware for amt 1.25 ths system. My amt web site no longer showing me the home or setup link. Thanks



PART 2:

Reserved for power consumption, hashing stats

Initial Hashing stats. I will post a more sustained average from the miner later on this is just to start.
http://i.imgur.com/sC2zEvP.jpg

What the pool reports after about 10 minutes. This is on BTCguild. I will move the miner over to elgius for more accurate stats.

http://i.imgur.com/rP557Ik.jpg

While there is a 12 hour average here. This is pretty much what it looks like all the time. I think the 1.27Ths number is fixed and always in there. No matter what I do that number will not change. The pool reports

http://i.imgur.com/NAQjcAR.jpg

This is about the norm. Usually a but lower at around 950 most of the time. The performance is not consistent and this is actually the best it can do. Looks like other people who reported a 10 percent rejection rate. CGMINER stats coming soon.

http://i.imgur.com/9Xwwwi8.jpg