Post
Topic
Board Hardware
Re: [Guide] Dogie's Comprehensive Avalon Avalon4 Setup [HD]
by
dogie
on 13/01/2015, 22:36:20 UTC
Quote
Temperatures should not be let to rise above 70C

Where did you get this information?? Is it from Avalon chip's datasheet?

No, its just a sensible number. Chips are no where near any boundary under stock cooling as it works so well.


Quote
and you will need a typical computer PSU with 4xPCI-E 6 pin power connector

I'm wondering why does they put 8-pin connectors on miner's boards?..

Thanks for the nice guide and photos.  I liked the '360 deg' view photo. 
As Rabinovitch said, the power connectors clearly look like 8 pin and not 6 pin PCI-E.

Cheers

Correct, they are 8 pin however to keep from confusing people I refer to them as 6 pin as that's what they will have seen on every other miner and are familiar with. If they already know the difference between 6 and 8 pin, then they don't need the information in the first place. Its a bit of a catch 22. You could probably also get away with only 2 PCI-E 6 pin, and even on one cable strand if its 16AWG, but again if you're in a position to use a more extreme arrangement then you likely already know that.