OP
I checked out the latest binary and it works great IF I mine at the Westhash or Nicehash pools, however, I am still unable to mine solo to my localhost wallet.
I have bitcoin wallet open and synched on 127.0.0.1
I went through step by step instructions on 7queue s1 binary
All good. Green check mark on pool if I point to Westhash.
However, Antminer says my wallet pool (192.168.1.5 < my localhost ip) = dead
Bitcoin .conf - rpcallowip and rpcport are all set, server=1, listen=1
Tried portforwarding on router both on/off
Tried upnp on/off in conf file
I test mined the wallet with a CPU and a GPU from local host, all good.
But Ant S1 will not connect...
Any ideas?
Maybe a sample .conf file?
There should be a binary called: cgminer-solo in the tar file, use that for solo mining from the S1.
This is the /root/.cgminer/cgminer.conf I have used.
You will have to change the ip:port and the btc-address, note if you use the [W]rite config file from within Settings it will wipe out the btc-address
{
"pools" : [
{
"url" : "http://192.168.42.24:8330",
"user" : "L5dGAbLRTqrLzgAp",
"pass" : "q1FgTlCmXHPmV59t"
}
]
,
"api-description" : "cgminer 4.7.1m",
"api-listen" : true,
"api-mcast-addr" : "224.0.0.75",
"api-mcast-code" : "FTW",
"api-mcast-des" : "",
"api-mcast-port" : "4028",
"api-network" : true,
"api-port" : "4028",
"api-host" : "0.0.0.0",
"bitmain-cutoff" : "60",
"bitmain-options" : "115200:32:8:56:250:0981",
"bitmain-temp" : "50",
"btc-address" : "1JUFZerCHPcBn6YS1iwYYCd9hKCZ2ShHDZ",
"expiry" : "120",
"hotplug" : "5",
"log" : "5",
"queue" : "0",
"scan-time" : "60",
"shares" : "0",
"suggest-diff" : "0"
}
Edit:
I ssh into the S1 and then run ./cgminer-solo
Using the web interface to solo mine requires modification to the scripts, you should also disable the startup of cgminer and comment out the scheduled task with a #