Ok, I went ahead and bent the pins back. It looks fairly good except for one pin that appears to be missing the tip. I will try to borrow a 1155 CPU this week and test the board.

Here is what it looks like now: http://i.imgur.com/k3eLG.jpg

The red circle shows where the partially decapitated pin is.

Edit: I looked at an Intel datasheet for the 1155 pinout, and it looks like the broken pin is for one of the DMI_RX sets. Hopefully this only breaks at most one of the links to the PCH. I will update this thread when I fully test everything.