Post
Topic
Board Mining support
Re: BITMAIN Antminer S3 support and OverClocking thread
by
cenicsoft
on 21/01/2015, 18:03:55 UTC
Please help me...
http://prntscr.com/5ut4us


Your error rate is quite high.  You should dial back the clock speed.

Error rate % calculator: http://www.coincadence.com/antminer-s1-hardware-error/

Was built in S1 days, math is the same...

None of my S3's have error rates higher than slightly above .03%. Clocks vary from 237 to 250. You may need to play with the voltage as well to get the right mix. Not all S3's will hash at 500Gh/s though so you may simply have one that is slower.