@FuryFever

If you have a board not powering on please read back a page to my post about shorted boards. If it's not coming on your probably have a short that you will need to 'blow out' before you can start the rest of the board. It's strange though that you have 2 green lights on the power supply so that board may actually be cooked.

Arctic silver thermal compound sucks. The burn-in period is 200 hours so it's really not good for a 100% continuous utilization application. If you are going to use an ordinary non-conductive thermal compound I recommend Noctua nt-h1. Also use TONS of it when applying. You want to fill all the air pockets in the spacer ring and lastly wiggle the water block down to make sure you get any bubbles out. Each of those steps should yield about 10-15C decrease in temps which combined will leave you with a decent working miner.

If you have more questions let me know. I'll try to help.

Lastly antminer is the way to go. I got my terraminers running well and sold them to buy 2 antminer S4s.