Quote from: dmwardjr on March 02, 2015, 12:51:34 AM

Quote from: Finksy on March 02, 2015, 12:27:24 AM

If anyone from the initial group buy in North America has any problems with any of their boards, I would be happy to have replacements sent out immediately on behalf of J4bberwock. Send me and J4bberwock a PM if you have any defects at all and we'll get you sorted out.

I live in the USA but I bought mine straight from J4bberwock. I bought 8 of them and 4 of them turn on the PSU but do not turn on the fan. I'm going to tear away the white glue stuff and make the following solder connections myself...

http://i.imgur.com/qiFVfJB.jpg

If this voids any type of warranty on them doing it myself, please let me know. I've made thousands of solder connections. I know what I'm doing. For example, I engineered, designed and built these training boards to teach telephone technicians how to use their meter to identify and locate troubles. The training boards have 192 solder connections each and the master board that connects them all together has well over 200 solder connections. The entire setup has 6 training boards, one master board, 3 bride tap boards and one power supply. I've made 6 sets up these training boards. Each set has a total of 11 cases. So, a total of 66 cases.

Picture of one of six training boards below. Each board has the same resistance as 19,700 feet of 24 AWG wire and each board has the same capacitance as 19,700 feet of Air Core Cable [Not Jelly Core]. 1,700 feet of the 19,700 feet is actual real wire. I needed real wire for when I teach them how to use a Time Domain Reflectometer (TDR).

http://i.imgur.com/9EWBojf.jpg

Picture of 3 of the 6 training boards, power supply, 3 bridge tap boards and one master board.

http://i.imgur.com/asSxe8l.jpg

This is a picture of a class I taught in Leesburg, Florida. I did a total of 22 classes in Leesburg with 12 technicians in each 4-Day class. You see the 6 training boards connected to the black master board in this picture. The power supply and 3 bridge tap boards are underneath the table. I teach them how to use their JDSU HST 3000 to identify and locate troubles over a 4-Day period. I wish I had them 2 weeks but I'm forced to teach them what I can in a 4-Day period.

http://i.imgur.com/8Ay71uQ.jpg

You managed to turn the fancoolers without break board?

I can indicate that I tap pin to light source 2880