Re: NEM Official Thread -NEM has launched[Updates&Discussion]
Is someone able to help with the error 699? I am still not be able to harvest. Thanks.
edit: saw a thread at the off. forums. sorry.
edit: saw a thread at the off. forums. sorry.
I have the same problem as discussed before (see under this post). Getting error 699, tried to stop/start delegated harvesting; Start/stop local harvesting, no change at all. I don´t understand that. Can i connect with a remote node?What is a node? At my settings there appears "localhost", delegated harvesting is active; but when i try to start delegated harvesting: Error 699.
Thanks a lot!
I would first setup a local NIS and NCC and get that working to be sure that there is no principal problem. Then activate delegated harvesting.
Meanwhile you can setup a remote NIS. Once the delegated harvesting is activated (needs 360 blocks) shut down local NIS and start remote NIS with the remote key as boot key.
Then change setting in ncc to connect to the remote NIS.
Thanks a lot!
..Too..many..posts...
Could you please answer this one?
No they don't have to run at the same time. Only the node you're harvesting on needs to run.
Anything else would defeat the point of the excecise.
Ah nice..
So the approach is:
- Setup remote node with NIS and NCC
- Set remote node's address in local settings -> host
- Activate delegated harvesting
Is this correct?
Could you please answer this one?
Will local node and remote node have to run at the same time to do delegated harvesting?
No they don't have to run at the same time. Only the node you're harvesting on needs to run.
Anything else would defeat the point of the excecise.
So the approach is:
- Setup remote node with NIS and NCC
- Set remote node's address in local settings -> host
- Activate delegated harvesting
Is this correct?
I would first setup a local NIS and NCC and get that working to be sure that there is no principal problem. Then activate delegated harvesting.
Meanwhile you can setup a remote NIS. Once the delegated harvesting is activated (needs 360 blocks) shut down local NIS and start remote NIS with the remote key as boot key.
Then change setting in ncc to connect to the remote NIS.