Some longer interval tests...
My 970/750ti test rig (linux, quark algo, 0.1 diff) reports ~27M with -g 3 setting now. It was 19M without -g parameter. But yaamp reports lower hashrate! It is about the half of the hasrate reported by ccminer. (13M vs 27M)
So the accepted hasrate decreased by 30%
It is a 3 hours average.
The situation is almost the same with -g 2 setting.
But as I recognized acceptance rate is 100%!
My 970/750ti test rig (linux, quark algo, 0.1 diff) reports ~27M with -g 3 setting now. It was 19M without -g parameter. But yaamp reports lower hashrate! It is about the half of the hasrate reported by ccminer. (13M vs 27M)
So the accepted hasrate decreased by 30%
It is a 3 hours average.The situation is almost the same with -g 2 setting.
But as I recognized acceptance rate is 100%!
If you run quark at nicehash, you will get the average speed of the last 24 hours and also a detailed graph of the performance over time.
Do you get many "does not validate on the cpu" errors?
Try to reduce the cpu-priority