Re: ANTMINER S3+ Discussion and Support Thread

Hello, today an s3 of mine stopped working, when I turn it on the fans immediately start running at full speed, and it does not hash, blades and fan speed don't appear on the miner status tab.

Does anyone know what could happen?

Thanks in advance

If you simply bricked it, returning your Bricked S3 control PCB to Denver address with $15 Money Order, the replacement be send your way.

Bitmain Warranty
3700 Quebec Street,
Unit 100-239,
Denver, Colorado 80207,
USA

Tel: 844-248-6246 (844-BIT-MAIN)

* Better Status Tracking, please send email to support@bitmain.zendesk.com and let the techs know your tracking number.

@bhanu545,

Please roll it back to older firmware and see if the problem goes away.

you may have to input a dns server ip in manually.

Check DNS IP use google to test 8.8.8.8

Or, likewise, input the pools by ip address and if it mines then your dns is bad.

looks like your servers are up an alive. I would check the wiring something may not be connected if you have your miner overclocked set it to default and restart. A shot in the dark would be to reflash firmware and hope their was a bug.

thanks for the help, done all that and not working, Sad

The red light near to the ethernet port is always on, if that helps

Do the lights for Ethernet stay on orange and green or are they off. You may have a faulty control board. You can boot up into your miner but your control board is not connecting to your hash board properly meaning it would be the connectors from you hash-board to your control board or the control board itself.

The orange and green lights stay on, I have swapped the control board with another one working fine and that's the problem, it is a faulty board.

Any suggestions on where i can buy a new one or fix this one?

Thanks everyone for the help

Take a look at this http://www.data321.net/1w6xe_uqu__nw_2vu19_6w_igjjdbc_D0
also this is interesting but i couldn't find if they succeed or not hard to follow and shift through.
https://bitcointalk.org/index.php?topic=671128.new#new
post any success