I would just like to thank all that have been working on the bitstreams and such, ive been away for a month (a weeks holiday and then waiting on my rma return, etc).
Flashed the 2 new boards to controller 1.5 and shortfin_dcmwd4e_ed_test_200_overclock.bit for the hour that both have been running, i have average Utility per pair of 5~5.5, which seems pretty good to me, such a change from my poorly board before
For anyone that has done the up/down cable, is there anything special i need to change in my run commands? I know i have to connect the cable and set the master/slave dip, but is that it, does the dual stack just present as 8 com port as it would do individually?
Flashed the 2 new boards to controller 1.5 and shortfin_dcmwd4e_ed_test_200_overclock.bit for the hour that both have been running, i have average Utility per pair of 5~5.5, which seems pretty good to me, such a change from my poorly board before
For anyone that has done the up/down cable, is there anything special i need to change in my run commands? I know i have to connect the cable and set the master/slave dip, but is that it, does the dual stack just present as 8 com port as it would do individually?