Look at this article here.
It's in Russian but you can view the translation in Chrome and see the detailed screenshots and settings of the image I posted - it's the same as in this article. Moreover I think the hardware is pretty much the same as yours.
And I'm pretty sure that this image works - tested on more than 10 of Dragons. No sure where you see these messages but its IP address is 192.168.1.113 (HTTP access).
You said that this rig was for spare parts - it might have a some kind of hardware problem (control board, RPi or something else broken).
It's in Russian but you can view the translation in Chrome and see the detailed screenshots and settings of the image I posted - it's the same as in this article. Moreover I think the hardware is pretty much the same as yours.
And I'm pretty sure that this image works - tested on more than 10 of Dragons. No sure where you see these messages but its IP address is 192.168.1.113 (HTTP access).
You said that this rig was for spare parts - it might have a some kind of hardware problem (control board, RPi or something else broken).
yes i am sure its the same model - probably some partial hardware issue
the rpi it came with was broken - i replaced it for a rpi b+ - slightly different rpi model but maybe that's what the problem is
- driver support for networking ? on the image - would it be an issue - i wouldn't have thought so . the new rpi networks fine with other raspbian sd installed no problem remote accessing with ip address- but no network lights on the miner image install.
tried without control board attached in hope it would simply network but still not
getting the messages from the rpi - hdmi out to monitor
so its got to be the software images network driver ? right ?