Post
Topic
Board Hardware
Re: SP20 problems
by
notlist3d
on 29/05/2015, 14:29:23 UTC
Two 750W EVGA units. I've also tried it with a pair of Corsairs and a 1300W EVGA unit. Same results.

I would normally say do SD reset.  But you mentioned that did not work.

I suggest asking seller what the IP address.  This allows us to see if IP range is in right area, or of it needs changed.  I would keep in contact with seller on some questions as worst case you have to do a dispute if it will not run no matter what.