Man, some of you guys are fucking annoying. Get off of Dogie's case, or start a thread dedicated to Dogie bashing so you folks can congregate there and circle jerk each other in privacy so we don't have to continually read your fucking useless drivel.

Since none of you geniuses actually have one of these, I'll comment on them. I've got 3 S4+, and so far they're running great. Not a single issue. They seem much better than what came with S4s, by a long shot. Will they die in 2 months? Who the fuck knows. If BITMAIN is serious about these PSUs, they should send a sample to Oklahoma Wolf over at jonnyguru.com. He'll reveal the truth about this PSU in short order. (BITMAIN: If you're interested in this, I can set it up... Just PM me)

About those 2 pictures posted earlier... The first has nothing to even do with the PSU, it's a heat sink fin loose in the main S4 case. BITMAIN QC failure for sure, things like that are hardware killers. The second picture is of a pinched 12V fan wire inside the PSU. Yep, another QC issue, but one that falls on the PSU OEM, not BITMAIN. BITMAIN can't be expected to open up every PSU to check them out for physical damage, in fact they'd probably cause more problems than they'd catch if they did. What that picture tells me, is that the short circuit protection works perfectly in that PSU, and it saved the PSU from failure. You'd be a fool to think this only happens to BITMAIN hardware. Pinched wires have happened with Delta PSUs, Flextronic PSUs, Seasonic PSUs, etc... Shit happens. It'll just happen much less with the big boys I just mentioned.

Now, this PSU is a no-go for me. 18AWG wires and unknown quality means I'll stick to used server hardware made by the likes of Delta.