I dont think you guys are understanding what i mean...

Basically to create the product i do a few things

- 3d Print my case
- Buy chips
- Buy PSU
- Buy Raspberry PI
- Buy a few other ad-ons for the pi

This will all come together as a "plug-and-play" type miner, I have a unfinished 3D printed model..
http://i.imgur.com/pWtPPPC.png
The 4 holes in the front are for Ethernet and optional PSU input, the larger rectangular one is for an alarmclock like gui showing the status of the miner...

http://i.imgur.com/OL4xe4m.png

The PI will be stored down where the Ethernet input is, and it will allow the gui implementation to be easier, The PSU will either be stored in the back, or on top of the blue. Im not really sure yet... Then ill make some holes for fans, THERE WILL BE ALUMINUM MOUNTINGS FOR THE CHIPS TO PREVENT THE PLASTIC FROM MELTING!!!!

Like i said, the 3d model is very very premature and has a lot of work still to be done.