Are the dipswitch settings correct on the bitstream upgrade section? 'sw6 dip2 off' is contrary to this: https://bitcointalk.org/index.php?topic=94317.msg1073047#msg1073047 which shows 'sw6 dip1 off'
It looks correct as per the settings here for the 1.5 controller:
http://www.enterpoint.co.uk/cairnsmore/cairnsmore1_support_materials.html
'3' (a.k.a SW1-3) is programming enabled, '6' (a.k.a SW6-2) is SPI programming enabled
I'm referring to the section for upgrading the bitstream though, not updating the controller, is the SPI switch still relevant at this point in the procedure?
The guide is excellent btw
