Re: ANTMINER S5: 1155GH(+OverClock Potential), In Stock $0.319/GH & 0.51W/GH
I had both fans wired directly to the PSU "both S5 original fans" then I remove the internet connection and I was still able to view my miner status page. The temp shot up well above 80c
the bold part there says you are lying...
anyway, your posts are becoming very annoying..
Annoying or not.. I had the same experience he described.
I lost my internet connection when I was out one day. Came home, heard the miners beeping. I physically looked at the miners and the heat coming off of them was tremendous. I logged in and I was able to see a temp of 102 or 106 (I can't recall right now). I freaked out, killed the power and stuck a box fan on them to cool off. So I didn't get a screenshot that time.
I don't know what the software should or should not allow (allowing access or not). I do know I got this screenshot when a pool failed (and the software did not appropriately rollover). The software also didn't shutdown. I know the fan was barely spinning (no matter what the screenshot showed). So I know there are multiple inconsistencies with what the software should do but doesn't. The screenshot temp was in harmony with my IF thermometer reading.
on the official firmware when you lose connection to a pool, cgminer doesnt run the bitmain sensors api and the ui freezes on whatever readings it was on the last time it was ran. it just loops trying to connect to pool.
but in your case the fan did slow down, as well as mine.
but dog1965 is saying his fans are on the psu via molex adapter running at 100% and his s5 was still running above 80c..