Ninjastic
PostEdited versionsQuotes to this post
Post
Topic
Board Hardware
Re: ANTMINER S5: 1155GH(+OverClock Potential), In Stock $0.319/GH & 0.51W/GH
by
toptek
on 11/08/2015, 08:23:58 UTC
Quote from: shadow1975 on August 11, 2015, 07:54:01 AM
Quote from: dmwardjr on July 31, 2015, 08:45:29 AM
Quote from: shadow1975 on July 31, 2015, 08:26:19 AM
Which fan do u recommend for replacement for cooling S5. Original one has broken down.

I personally like these:  http://www.amazon.com/gp/product/B00HQ18UDA?psc=1&redirect=true&ref_=oh_aui_detailpage_o06_s00

What's difference between Delta TFC1212DE-PWM 120mm x 120mm x 38mm and Delta PFC1212DE-PWM ?

Difference is in Amp's. TFC has 3,9A and PFC has 4,8A.

I connect TFC, beacuse I have made a mistake when ordering. Next fan is working OK, but temperature raises till 80°C and then shutdown. RPM was 0. Then I reboot S5. Now I have RPM displayed but miner is not working ( see picture below ).




Is it dead ? Any solutions ?


Shut it off let it set for at least one hour reset to factory defaults . use the right fan . one works with it one won't i think the TFC1212DE-PWM won't the controller is not powerful enough to power it but there is any other way to use that fan with PWM  .http://www.ebay.com/itm/181694032917?_trksid=p2060353.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT  but has to powered off the PSU . the Delta PFC1212DE-PWM may not either off the controller . i use these on my s5 http://www.amazon.com/gp/product/B004Y1HLA8?psc=1&redirect=true&ref_=oh_aui_detailpage_o06_s00 with the S5 controller and the speed thing im testing out on some old script miners for fun .


This is why niether may not work with the S5 controller. TFC has 3,9A and PFC has 4,8A.  you hit it on the nose .