Post
Topic
Board Hardware
Re: Wierd Behaviour on Antminer S5
by
gerardo15
on 13/08/2015, 00:48:36 UTC
what is your internet connection?

Sounds like your net connection is dropping out.  (since the psu's you use should be good)

Also did you  over clock or  use standard clock.

I have 2MBPS connection.

If internet connection is dropping out shouldn't all miners decrease their hashrate?

all miners are at default frecuency.

At first i thought the miner had a problem, but with all of them? different PSUs? my friends miners at his house suffer the same thing.

Why would a blade shut down (Red led goes off and Temperature decrease to 30-32 C)

sorry but I meant hard wired or wireless.

 you have hard wired and pretty slow one.  do you run other gear on that internet connection?

if you watch a 1080p or a 720p video on the net connection of 2mbps while mining you may drop out  a miner. 

wifi connects can have issues. not your case


 a slow switch can drop 1 board..




so modem(2mbps) to (switch) how many ports?  and are the ports 10 or 100 or 1000 speed.





if you are modem>>>(cat 5 wire)>>>8 port switch>>>> s-5's and a pc  it may work better then

modem
 1)one port direct to pc
2) one port to switch
3)switch to 5 or so s-5's

in the case of pc not on shared switch watching a movie could take too much bandwidth from the switche's ports

My configuration is like this

Modem>>Router TP-Link (This is where all the devices in my house connect to)>>>>>>Switch (8 port 10/100)>>> Miners

I never thought that one blade could stop working because of this? why always the same blade.. (left one) in all miners.