Re: [DIY] - Reward $100 | Antminer S1/S3 Blade on Raspberry Pi
Yes sorry meant transistors. Alright ill try to get it work with 2 blades thanks!
If i get it right im gonna start to make a fine pcb with connectors. Im getting crazy of all this mess!
About my try to repair my S3+ blades:
After i took the whole thing apart again i found the oscillators on the S3+ blades, which i first thought there weren't any on it.
I had an old, still working S1 miner. First i checked how the oscillators responded with an oscilloscope and they where working fine as expected.
Then i checked my S3+ blades and they where dead indeed. No signals, no voltage, nothing.
The donated oscillator works after replacing it on the S3+ blades, again i checked it with an oscilloscope. It gets it voltage and signals on all sides again.
But STILL no signal on the RX. The TX still around 1.8v
So there's got to be something else that is fried and i cant find out what it is. Im about to give up on it now.
If i get it right im gonna start to make a fine pcb with connectors. Im getting crazy of all this mess!
About my try to repair my S3+ blades:
After i took the whole thing apart again i found the oscillators on the S3+ blades, which i first thought there weren't any on it.
I had an old, still working S1 miner. First i checked how the oscillators responded with an oscilloscope and they where working fine as expected.
Then i checked my S3+ blades and they where dead indeed. No signals, no voltage, nothing.
The donated oscillator works after replacing it on the S3+ blades, again i checked it with an oscilloscope. It gets it voltage and signals on all sides again.
But STILL no signal on the RX. The TX still around 1.8v
So there's got to be something else that is fried and i cant find out what it is. Im about to give up on it now.