I have an s3+ which has been mining for a couple of months now but yesterday it started to give me problems. I tried to restart it, but then it would start as always with the fans running at the lowest speed and not mining. After digging into this a little more i tried to do an ip scan to find where my miner was now but saw that the miner was offline, this is baffling because i can actually see the light on the miner as well as on the modem blinking. So i moved on to a hard reset, no luck. I then tried a new PSU but still same thing, then i tried another troubleshoot where i removed wires from each of the ports one by one and here are my results: on the right rail, the fans run at low speed with no LEDs blinking on the left rail the fans run insanely fast (like ive never seen them run like that before) and on one on each or 3 on each i saw the same thing, all LEDs on, fan at the lowest speed. Then today i noticed another thing where after another hard reset i saw that the red LEDs blinked for the initial setup and then momentarily the green one goes on very faintly after which both the green and the red go off and only the network LEDs run, still see it as offline on an IP scan and light on on the modem. Anybody know why this could be happening or if i could fix this? Help is appreciated.