Ninjastic
PostEdited versionsQuotes to this post
Post
Topic
Board Mining (Altcoins)
Re: Custom Innosilicon A2 Terminator image - Anx Edition
by
Prelude
on 02/10/2015, 19:08:17 UTC
Quote from: psycodad on October 02, 2015, 01:18:19 PM
Quote from: dman99 on October 02, 2015, 05:45:27 AM
Quote from: Prelude on October 02, 2015, 03:59:36 AM
Mark,

Your firmware doesn't support overclocking, correct? Any chance you'd consider adding it into your next version? I want to try your firmware, but I run my A2s at 1300MHz since the W/MH scale very well and my power is cheap enough.
What kind of performance/power usage are you seeing at 1300MHz?  I'm seeing about 9.58W per MH on one of my units, and about 9.14W per MH on another unit.  I don't have stock fans in my A2s, so my numbers may be a little different than others (the stock A2 fans are nearly 25 watts a piece, so I put in some more efficient fans).

My A2s all have ~19/17W fans (12V/1.6A or even 12V/1.4A). May I ask what kind of fans you are using now?


My 60mh was one of the first built, and had 2 really sub-par 25mm fans. I replaced those with Delta 38mm fans, which are 1.6A each going from memory. The 90mh unit came with 3 high quality 38mm 1.4a nidec fans, and those are still running strong after a year and a half or so.

What is the highest clock speed available with the ANX firmware? Can someone share some screenshots of it?