Issues like this are usually traced to the pins in the cables PCIE connectors. For high current applications like mining you need to use Molex 45750 series pins. You should also make sure the wires are 16AWG and have copper conductors. A properly constructed 6 pin cable with these components should be able to handle up to 300-400 watts without getting hot.
sorry I was absent for a few days.
the cables are the ones who gave me J4bberwock with the board .
the cables are very good for me.
I do not understand in fact this 'cooking'. I'm trying to figure out the problem.
I'm an electrician
and 'true that the pcie connector on the base and' very hot. I'm not sure that the connector and ruin the cables or the opposite ...
250w should give no problems.
I have other power supplies and other miner and I have not encountered these problems in connectors. once in Zeus miner x2 where the 8-pin pcie have a little blackened. but they have a different type of power supply.
24/24 true that around and under stress, especially if the environment and always on top 35 degrees. keep in mind that the air strikes the base of the power supply connector. may also be in the long run does not help the dissipation of the base and connectors pcie.
remaining of the idea that 'the board most clever I've ever seen