Re: ANTMINER S7 is available at bitmaintech.com with 4.86TH/s, 0.25J/GH
So I have decided to overclock one of my machines, Just to see, and well I would like some feedback, Temps are good, the error rate is good but what are peoples thoughts on the maximum safe frequency.
Or do people think this is already too far, Im not going to run this for long but would like to test for 24 hours with this machine, My ambient temps are low (8c-14c) and im using 2x EVGA 1300w gold PSUs on this one machine.
Or do people think this is already too far, Im not going to run this for long but would like to test for 24 hours with this machine, My ambient temps are low (8c-14c) and im using 2x EVGA 1300w gold PSUs on this one machine.
post a screen shot after 1 hour run time
post a screen shot after 3 hours run time
then I will give an opinion.
for now you have a 7 minute screen shot which is too short to make a guess on my part.
hint if your temps stay under 50 and your errors under 0.0050% you are in good shape