Re: ANTMINER S5: 1155GH(+OverClock Potential), In Stock $0.319/GH & 0.51W/GH
Heylo folks,
Looking for a little help. I didn't notice when, but sometime within the past month or so, one of my S5's stopped hashing or would produce minimal hashrate. Today I reset it back to the factory default and it won't hash w/ the default config. On the Status dashboard, it shows 30 asics on one board/chain and 26 asics on the other.
There's nothing visually wrong with it, to my eyes. Can you provide me with some guidance?
Looking for a little help. I didn't notice when, but sometime within the past month or so, one of my S5's stopped hashing or would produce minimal hashrate. Today I reset it back to the factory default and it won't hash w/ the default config. On the Status dashboard, it shows 30 asics on one board/chain and 26 asics on the other.
There's nothing visually wrong with it, to my eyes. Can you provide me with some guidance?
Swap PSUs, cables, and/or controllers with other miners, try to isolate the issue. It would be unlikely for both hashboards to go bad although not impossible. Take the plastic guards off and look closely for any physical damage/burns. That's roughly where my knowledge ends
, maybe others can help more.