Re: [Minera v0.6.1] Your next mining dashboard - Networked/CPUminer/CGminer/BFGminer
Just started using minera for my 3 gridseed blade pcb's.
At start the system says i got 3 local miners.
But 3minutes later i got 15 :S
hashing at pool says about 9mh/s. so thats ok.
Is this a bug?
Same problem for BFGminer as for Cgminer (cgdmaxlzeus)
from log:
[2015-11-25 22:40:34] GSD 0: Failed to send work
[2015-11-25 22:40:34] GSD 3: Failed to send work
[2015-11-25 22:40:34] GSD 1: Failed to send work
[2015-11-25 22:40:35] Found GSD 4aa at /dev/serial/by-id/usb-STMicroelectronics_STM32_Virtual_COM_Port_48D8685D3031-if00
[2015-11-25 22:40:35] Found GSD 5aa at /dev/ttyACM5
[2015-11-25 22:40:35] Found GSD 6aa at /dev/ttyACM4
At start the system says i got 3 local miners.
But 3minutes later i got 15 :S
hashing at pool says about 9mh/s. so thats ok.
Is this a bug?
Same problem for BFGminer as for Cgminer (cgdmaxlzeus)
from log:
[2015-11-25 22:40:34] GSD 0: Failed to send work
[2015-11-25 22:40:34] GSD 3: Failed to send work
[2015-11-25 22:40:34] GSD 1: Failed to send work
[2015-11-25 22:40:35] Found GSD 4aa at /dev/serial/by-id/usb-STMicroelectronics_STM32_Virtual_COM_Port_48D8685D3031-if00
[2015-11-25 22:40:35] Found GSD 5aa at /dev/ttyACM5
[2015-11-25 22:40:35] Found GSD 6aa at /dev/ttyACM4
Run exactly the same setup to keep some plants frost free in a greenhouse - ultimate recycling....
Runs fine mostly with cpuminer. though sometimes have to restart the miner from the menu after first boot to get it to settle down.
It will also do odd things sometimes on certain pools, nicehash being most notable. Seems solid on litecoinpool and ghash.
My manual options are set to :-
--gc3355-detect --freq=800 --gc3355-chips=40
This is with a minera image. Had to recompile from source to get minerd running with a manual install on top of ubumtu mate. (it was on an orange pi which may have been the issue)
HTH