Hi Everyone,
So i've been having problems with a new Antminer S7, it's not reporting board temp and then shutting down even thought i'm not getting over 38-42 temp. Sometimes it reports, other times it just shows 0. and now i'm 100% shut down and it continues to beep.
While doing as much research and looking around as i can, i came across this small discrepancy. The control board shows S5+ V1.6 despite this being an S7 (see photo below)
What does everyone make of this? Mistake from Bitmain? are all your S7s using the same S5+ Control board and what i'm experiencing is unrelated?
In the meantime, for info on what i've setup so far is:
I have updated to the latest firmware from oct. 23rd.
I'm running at the default 600 frequency from S7 Batch5
and fans were running at 100%
and it's PSU is the EVGA supernova 1600w G2
I got about 3 days work out of this before i started getting these shutdowns (started mining on saturday). The rig is setup in a well ventilated warehouse space, so plenty of fresh cool air.
http://massprint.com/FF/IMG_4431.JPGThank you in advance...
