This is probably a dumb question but I have not seen it addressed anyplace..
I don't suppose the bridge connector used on a mercury/saturn/jupiter/neptune board could be used as a bridge or at least modified as such?
again unlikely but just for clarity I figured I'd toss it out here..probably not one being a BBB to port board and other being PI to port board
and a 2nd newbie question...
I have read that the boards are the same between the say the previous BTC KNC boards *jupiter/neptune* etc ....but if that is true is it only
for the NOV such boards? and by the same I mean PHYSICALLY the same. I realize the FPGA chip I think it is has not be reverse engineered
thus no clone Titan Controllers
anyway just catching up on the stuff here beyond my expertise (which is much)
Yeah the beagle bone uses different IO pins so the bridge would be significantly different and wouldn't work. Yeah I seen a couple posts about the jup and nep having similar physical boards but the titan is a whole other ball game. It has a cyclone microcontroller on it, which i'm in the process of reverse engineering but it's a new one and it's not as simple as the cyclone III. I can see why KnC decided to go with it for the controller board. If I can pull out some compilable binaries from from the chip than I should be able to duplicate the whole controller like I did with the bridge.