Please pastebin your bamt.conf
Before I dump the whole thing... other than enabling the two GPUs that need to mine and editing
pools is there anything else that is
necessary to get started? To make things as simple as possible, I started editing less and less, so it seems that changing the
disabled value to
0 is all I did in the end.
bamt.conf is YAML. Indentation and spacing is relevant.
At a minimum:
1 - set disabled to 0 for the gpus you want to use.
2 - edit the pools file with your mining credentials
Don't use tabs in bamt.conf
Don't change the spacing in the indents
Check, check. Did that, used the built-in menus links to edit, didn't change spacing, set pools exactly as shown. Restart mining, no results. Tried this on three different machines, all dual 5830's, same MB. I did get it working with cgminer after setting
cgminer: 1 and
cgminer_opts, but it's not optimal since it doesn't monitor the miners for me.
again.. pastebin your bamt.conf and pools files with your login and pass obfuscated and someone may be able to help you.