Post
Topic
Board Mining speculation
Re: ASICs - which should you choose?
by
MrTeal
on 08/11/2012, 03:29:49 UTC
Thanks for your insightful thread organofcorti. It leaves me curious, though.. I have some bASIC devices incoming and your estimates are much higher than I was expecting. Is it not safe to say that the 54gh/s units will top at around 200w? Also, what kind of power connector will be required? others have speculated it will run on standard 6-pin pci-e connector, but wouldn't 8-pin be necessary if they really draw this much juice?

Tom has said the 54GH/s unit will use 100-120W, and will take either a 4pin molex, or a DC barrel jack.

The quote was along the lines of "a 1000W PSU will power 8 to 10 of the 54 Ghps bASICs". I used the more conservative estimate of 8/100 = 125W.
That's from the BTCFPGA Forum
We are expecting the 27Gh/s units to use between 50-60 watts and the 54Gh/s units to use between 100-120 watts give or take

this is estimated data - and will not be completely correct but it gives you a ballpark and as close as an estimate as our competitor friends have on their units