Can I please ask for some help here?
Anyone having an issue where the webUI doesn't show any miners but it's mining? Also, once I SSH to the rig, how do I take a look at the cgminer console? How about cgminer-monitor restarting every 5 minutes? (I commented out the cgminer-monitor in crontab) Man, without being able to see any of the ASIC info or the console trying to troubleshoot this is a real problem. Anyone had any luck running these rigs using Minera?
Mon Dec 14 22:15:01 2015 cron.info crond[404]: crond: USER root pid 970 cmd /usr/bin/cgminer-monitor
Mon Dec 14 22:20:01 2015 cron.info crond[404]: crond: USER root pid 1121 cmd /usr/bin/cgminer-monitor
Mon Dec 14 22:25:01 2015 cron.info crond[404]: crond: USER root pid 1226 cmd /usr/bin/cgminer-monitor
Thanks!
PS. I just re-imaged clean using the image in the OP, so I'm pretty sure that isn't the problem...
Same issue here rootdude. I have two of mine doing this about once a week. A hard reboot of pi and PSU usually works. But, twice now I have had to re-image and re-configure to get them showing the connected miner and mining info. Weird one. Have not figured out completely yet.
Interesting it should detect them. I would try what Phil suggested first. If that does not work try this (just a guess) but see what happens if you turn power on to miners with RPI off. Then turn RPI on with them on.
It should detect it without doing that but I wonder if it makes a difference for you. Mine had a hard day the power was off so electric company could cut tree's. It was fine after I was not there to do anything. So that was good. But they did survive a power outage and turning on.