Post
Topic
Board Mining support
Re: Antminer S7 Failed Firmware Update
by
VirosaGITS
on 23/12/2015, 13:51:36 UTC
Hi All

As per the title, I upgraded an Antminer S7 to the latest firmware and it never came backup (1 of 2 so def not a bad download). I have checked my DHCP Server for new IP addresses, no suck luck. There was 100% no power issues during the upgrade as the miner is in my works server room and I would have heard alot about it if there had been, the only thing that might have done it was switching browser tabs during the upload but I don't think so. The green light and fans never come on.... help!!

Any advice on how to recover this would be amazing, I know the S7 uses a beaglebone and the other equipment I have the uses it (kncminers) can be reflashed from an SD card but I don't know the S7 will.

Thanks in advance for any help.



Yeah there are quite a few people that have issue with flashing, because there are different version for different batch of S7. So people recommend not to flash it. But did you try a factory reset, with the on board reset button?