Re: GekkoScience Compac BM1384 Stickminer Official Support Thread
Just wondering if an S5 runs 60 chips for total 1150GH/s = 1150/60 = 19.16GH/s.
Whats the optimal settings to achieve this or higher because I'm struggling?
If an S5 can do it then we should be able to
.
the s5 is default at 350.. Whats the optimal settings to achieve this or higher because I'm struggling?
If an S5 can do it then we should be able to
.keep in mind you need 2A or so on the 5v line to achieve this.
Cheers bud perhaps thats what I'm struggling with
.exactly...I am trying to gear up for using Y cables on a Superbpag hub, which by itself is already 2A/slot, so i got some 3A Y's (with a very thick cord)...holding one stick back until i finally setup Debian on a PC in a double boot mode, then it is a go time, hopefully tomorrow.
This stick would be "experimental". Other eight chug along at default (~11GH).
Question to stick gurus: would it be theoretically possible to combine two Y's into a super Y? Essentially combining four slots to power one stick?