Quote from: Zerberfert on January 21, 2016, 11:17:26 PM

http://s658.photobucket.com/user/zerberfert/media/S7_Pool.png.html

http://i658.photobucket.com/albums/uu308/zerberfert/S7_Pool.png

There is my pool page. I bought some new psu's today and it is still not working. Yes the fans come on about 30 secs after I turn it on and they run wide open at 100% and are very loud. They vid's on youtube are not even half the noise level as mine.

VirosaGITS - I have no idea what you said. I do not know linux very well and didn't think I had to do all that on the S7. That's why I bought it and not other machines. I don't even see a command line to do all that.

The network is working because I can log into the machine and I have pinged a few sights inside of the S7 software.

Btw it is a batch 8.

The controller boot from an .img, if the .img is corrupted somehow it could fuck over CGMiner. And no you should not have to do this. If its a B8 then its probably still on warranty, if you received it like that, you should contact Bitmain and ask wtf if you have not already.

Maybe, just maybe Bitmain put the wrong firmware on it, i honestly don't know.

All i or anyone can do is probably have you check some things to figure out what is wrong. Bitmain may very well blame the PSU's. But assuming they are in working condition, you should of still been able to run the S7 at lower freq or with just one blade for example.

A good thing to do would be to try with a proper PSU in the meantime.