Re: [ANN] JIFFY COIN |SHA256 - 5.1M Max Coins

as soon as it connect it says something about that I dont have any BTC wallet and cant solo mine... Can someone help me with this?

hi here is a couple of links that may help with your setup

https://bitcointalk.org/index.php?topic=330665.msg11590434#msg11590434 (try putting --btc-address Jxxxxx )

also try this guide using 127.0.0.1 as the IP address

https://bitcointalk.org/index.php?topic=315477.0

When I try to use 127.0.0.1:15578 I get the following message:

Quote

[2016-01-26 16:58:07] Probing for an alive pool
[2016-01-26 16:58:17] Waiting for work to be available from pools.
[2016-01-26 16:59:07] No servers were found that could be used to get work from.
[2016-01-26 16:59:07] Please check the details from the list below of the servers you have input
[2016-01-26 16:59:07] Most likely you have input the wrong URL, forgotten to add a port, or have not set up workers
[2016-01-26 16:59:07] Pool: 0 URL: http://127.0.0.1:15578 User: user Password: pass
[2016-01-26 16:59:07] Press any key to exit, or cgminer will wait indefinitely for an alive pool.

I did add the --btc-address Jxxxxxxxxxxxxxxx and that seems to work, and I did enter my IP for my PC where i am running the qt -server (http://192.168.0.10:15578)

AND IT WORKS! Cheesy

Thank you for the help guys!

So for everyone out there who is looking for how to remotely run your setup in the home use the IP for the PC/Mac where your qt wallet is running, not the 127.0.0.1 as every guide out there on internet says... I guess 127.0.0.1 its just working if you run the miners from the same PC/Mac.