Re: ANTMINER S7 is available at bitmaintech.com with 4.86TH/s, 0.25J/GH
Have my S7 running 
Due to the amount of noise it makes I underclocked it's frequency to 400. Getting 3TH at that rate. Whenever I find a better place to keep it running I'll up the frequency a bit. There's no way that I'll be sleeping with it in my room.
Due to the amount of noise it makes I underclocked it's frequency to 400. Getting 3TH at that rate. Whenever I find a better place to keep it running I'll up the frequency a bit. There's no way that I'll be sleeping with it in my room.Why not run it in the garage at full blast and get free heat while you're at it? You're losing money at 3TH. If you're living in a cold weather area, lower the fan to 30% and see if the temp is within ok range. IT would be more livable. You can also buy custom 3D printed DUCT where you duct the Intake to take in cold intake air from outside and push out the hot air to the outside as well. If you do that, you can lower your fan speed which is the only thing that is making those noise.
http://www.ebay.com/itm/4-pack-bitcoin-antminer-s1-s2-s3-s4-s5-s7-zeus-lightning-fan-air-duct-4-pack-/331763938079?hash=item4d3eabf31f:g:edgAAOSwpRRWn~Hp
I would be careful with that seller on ebay, has only sold one item ever. Only has sold one item in last 12 months and it was stated in feedback that communication was good but shipping was slow after payment.
I used this: http://www.amazon.com/gp/product/B000SL22FW?psc=1&redirect=true&ref_=oh_aui_detailpage_o01_s00
And built my own enclosure for the miner out of cardboard. Works well enough.
That's very creative. 100 extra points for being resourceful and creativity.
I agree it is a intersting way to get the exhust out. Are you able to take picture of where they all go to?
I'm curious as far a what you did with other end of duct.