Hello halibit,
Can you update us on the progress you have made with the model in the past two months?
Thank you
After several tests I have made our version 1 model using 400 to 1000v pulse.
Opto isolated pic will read pulse to the low voltage size and separate cycle voltage result in eight samples with 1024 levels.
Those eight samples are depth and 1024 value is target size.
This model will have
- LCD screen and sound monitoring.
- microprocessor programmed system.
- Manual and auto Ground balancing.
- Surface trash and iron filtering system
- Target depth and size calculating.
Patience, I can show results soon..
Rest 5000 shares will be available after that.
I know you are waiting, I have been busy with alcurex but i have some progress with project.
On next week, I can send scope picks about tx and rx pulse data, but before I can show how it will acting in real life, I need to find one more component. I need 1-10 or max100us isolated relay for damping rx coil before reading process. This need to be physically open/close model so it will not damp coil when collector is open.
-halibit-