Hey guys, i recently picked up two used Antminer s5's and they are working perfect, hashing right where they are supposed to... but i started to see errors in the kernel log :
[ 3935.519938] ch0-as29: dev->task_buffer_wr{0x00003590}rd{0x00003bcc}ret work_id{0xbb4a} don't match task_buffer_match{0x3b4a}
[ 3935.531790]
[ 3939.207575] ch0-as29: dev->task_buffer_wr{0x00003fc7}rd{0x00000137}ret work_id{0x80b4} don't match task_buffer_match{0x00b4}
I've googled around and almost every response brings me back to here.
Im currently running 2x Antminer S5's with a 1300 watt EVGA g2 gold plus power supply.
Thank you all for the help.
den
[ 3935.519938] ch0-as29: dev->task_buffer_wr{0x00003590}rd{0x00003bcc}ret work_id{0xbb4a} don't match task_buffer_match{0x3b4a}
[ 3935.531790]
[ 3939.207575] ch0-as29: dev->task_buffer_wr{0x00003fc7}rd{0x00000137}ret work_id{0x80b4} don't match task_buffer_match{0x00b4}
I've googled around and almost every response brings me back to here.
Im currently running 2x Antminer S5's with a 1300 watt EVGA g2 gold plus power supply.
Thank you all for the help.
den
So if i read you right, there's not any issues you need support with?
Or you're asking if those log are an issue? No, i get that too.
Maybe someone can tell you what they mean. However.
There's nothing wrong with the PSU setup.
Heh, yeah i did set that up to be a little confusing. yes, i was asking about the log issue. I was simply putting my system set up to avoid the question most ask : "What power supply are you using?"
Also, i see the red LED on the front is blinking on... off...... on... off......
Thank you again
Mine blink Green, not sure whats up with red blink, specially if its hashing fine. With a EVGA G2 1300 you can run both at full speed of 393hz~ for 1.3TH/s. It'd draw about 1300W.