hi there
I turn off the miner few days a go needed to clean 2 of the cubes and when I plugged them on back again HW Status shown them OFF any suggestions how can fix that
I tried every troubleshooting I know to get them back ON nothing seems to work
Thank you
Maybe this is simply like that: if you see on the HW status page in which slot you connect your cubes and there is Temperature and DC/DC avg temp showing but the CLOCK is OFF so go to Advanced page and turn them ON by simply from dropping menu on each die from that OFF status set clock which you wish to let them run example 300 MHz and then scroll down to bottom of this page to click on Apply changes.
sometimes if you plug cubes to different ports as they was before, you can get this situation.
I hope this help
Re Neptun controller - I can confirm, its working as normal titan controller with titan bridge and pi with Titans cubes.