Post
Topic
Board Mining (Altcoins)
Re: Claymore's Dual Ethereum+Decred GPU Miner v3.2
by
molitar
on 23/04/2016, 14:34:54 UTC
over 4 hours and Decred is...

   Confirmed: 0.0000 DCR
Unconfirmed: 0.0661 DCR

I do not even have a single confirmed after that many hours!

Decred needs 256 confirmations to mature. The average blockrate is 1 block per 5 min. So you should expect confirmed coins after 256 * 5 min = 21 h 20 min. 4h not enough.

Thanks for that information but also how about the high number of rejects?

Also I am getting this error many times.

Pool returned error #56.
 DCR: Failed to connect to pool, retry in 20 sec...

BTW -tt 100% does not work at all I tried it and watched my manual set fans in the Radeon settings drop down to 25% fan speed.  It lowered instead of raising fan speed.  I had  to remove the -tt completely from the line and just use the AMD setting.

Last question is my hash rates good for this mining?

ETH: 04/23/16-10:37:55 - New job (target 0x00000001310a5081) from coinotron.com:3344
ETH - Total Speed: 41.149 Mh/s, Total Shares: 2, Rejected: 0, Time: 00:06
ETH: GPU0 21.065 Mh/s, GPU1 20.084 Mh/s
 DCR - Total Speed: 617.230 Mh/s, Total Shares: 6, Rejected: 2
 DCR: GPU0 315.969 Mh/s, GPU1 301.261 Mh/s
 DCR: 04/23/16-10:38:47 - SHARE FOUND - (GPU 1)
 DCR: Share accepted!
 DCR: 04/23/16-10:38:59 - SHARE FOUND - (GPU 1)
 DCR: Share accepted!

actually seem to be doing a bit better since I dropped in AMD settings the power level -20% on the R9 380x and same for the 280x.  Is it possible to drop power requirements more on the 280x ok?  That one card has option down to -50%.