Hi,
I just tried the -100mv Mem bios on my new XFX Radeon Nano, and strangely I do not get any GPU readings anymore. That includes core clock, mem clock but also temperature.
MSI Afterburner also shows completely nothing (see screenshots).
Did I miss anything? I'm on Win10 with 15.12 driver.
http://gpuz.techpowerup.com/16/05/28/9kt.png
http://gpuz.techpowerup.com/16/05/28/w6n.png
Any ideas?
Additional question: Is it normal that the driver is R9 Fury Series? There's no nano?
I just tried the -100mv Mem bios on my new XFX Radeon Nano, and strangely I do not get any GPU readings anymore. That includes core clock, mem clock but also temperature.
MSI Afterburner also shows completely nothing (see screenshots).
Did I miss anything? I'm on Win10 with 15.12 driver.
http://gpuz.techpowerup.com/16/05/28/9kt.png
http://gpuz.techpowerup.com/16/05/28/w6n.png
Any ideas?
Additional question: Is it normal that the driver is R9 Fury Series? There's no nano?
People should read more carefully
If you flash, make sure to completely turn off your system, as in turning off the electricity (this because the memory controller can be reprogrammed).
if for some reason, gpu-z does not show the correct info, reinstall every third party app, like AB, Trixx, GPU-Z or whatever.
If this still does not solve your problem, you can do another thing, if you open crimson settings, and restore to default settings, reboot, your issue can be resolved.
If still not ok, use DDU to remove your drivers, reinstall them and you'll be fine for sure!
Good luck!
Greetings!
Hi, Thanks much for your answer.
I completely uninstalled everything. Even with DDU.
However, the following still happens: When no monitor plugged in on the nano, then no data in gpu-z/afterburner is shown. Once plugged in, core/mem clock + temp immediately show up in gpu-z/afterburner.
Of course, with monitor the overclocking capabilities of the core from 800 to above 900 fails and the gpu crashes.
What am I missing here?
I am using the AsRock H81 Pro BTC as mainboard. Any wrong BIOS settings? I also put the gpu directly on the MB without riser. Same result.
Btw someone else had the same issue in this thread. But no result was posted.
Let me know if you have some more ideas.
Thank you!