Talan,
Thx for that register dump.
Now try this one.
LinkFlash it, completely shut down your system (Turn off the electricity!), completely remove driver (DDU), reinstall driver, remove Afterburner profiles, run afterburner and slightly go down on the core voltage (steps of -6mV)
This one has -75mV VDDC and -75mV MVDDC. so basically you can still go to -100mV if you lower your core voltage in afterburner to -25mV. Your system will be already booted and won't be going crazy like it is right now.
If this works, let me know, i'll lower the memory voltage until you hit the sweet spot.
Hi Eliovp,
I tried your ROM but it shows the same effect. I was able to change the core to 900mhz but once I started claymore's miner, the whole system crashed.
I really wonder why no other experiences this issue. What's your program to display your remote desktop? I use ultraVNC. I somehow suspect that the system still uses the GPU to render the remote desktop and causes the issue. Again, once I use internal graphics, no core/mem clock is shown in afterburner and I can't change the core to 1000.
Before I flashed the 75/75 rom, I just let it mine with the -100mv mem@800mhz bios and it worked @ 22mhz. Of course, I want to reach the 30mhz...
Do you think it can be due to asics quality?....