Hi all,
I have an S3+ that looks kinda stuck on startup. (Lan green light is on, and the red led flashing nonstop)
I found some instructions on the web saying I could connect to the S3 with a serial module and debug it....
I got myself a CP2102 usb 2.0 to uart module serial converter and I install putty... but the thing is that I dont know anything about the both of it....
Is there someone that could help me try to revive my S3... (Taugeran's revival guide is lacking a lot of vital information for a newbie like me....)
Anyone from bitmain could help ?!?!?! (contacted the support, but all they said it's send back the controller)
Thanks all, this would be very much appreciated !!!
Assuming your are in US and having trouble doing this I would take a look at BitmainWarranty. You can contact them on the forum or via website -
https://bitmainwarranty.com/ . But assuming S3 board works fine and just a bad flash you should be able to send in and get it reflashed.
I would think at least I have not checked on this specific procedure with them. But hit them up and I think you will have good results.