Re: Bitmain's Released Antminer S9, World's First 16nm Miner Ready to Order

Just ordered one. Wondering what power supplies people are using in the states?

Thanks guys!

I suspect that the bitmaintech psu is just a tiny bit short to run an s-9

it does need 210 or more volts so if in USA you need correct voltage wires.

now if you are looking for an ATX 120 volt option EVGA has them but they are costly

titanium 1600 watt cost - 386 usd

https://www.amazon.com/EVGA-SuperNOVA-TITANIUM-Crossfire-220-T2-1600-X1/dp/B00R33ZBQU/ref=sr_1_1?

platinum 342
https://www.amazon.com/EVGA-SuperNOVA-PLATINUM-Crossfire-220-P2-1600-X1/dp/B00NJG61JQ/ref=sr_1_3?

gold 302
https://www.amazon.com/EVGA-SuperNOVA-Crossfire-Warranty-120-G2-1600-X1/dp/B00MMLUIE8/ref=sr_1_2?

How many of the Bitmain APW3's have you tried out? Through my testing I have 1 remote connected to a APW3 and one now at my place connected to an APW3 and not having issues with them.

What way are you testing the APW3 to determine they are coming up short? I have been testing by running the units with them so wanted to what tests you were using to get this. Just trying to compare as we seem to be getting different results.

I have personally purchased and have been using 30 of the Bitmain PSUs with no issues so far. The rest of my miners have been on rental PSUs. I would say that over the time of 9 months is a very good track record.