Post
Topic
Board Hardware
Re: Bitmain's Released Antminer S9, World's First 16nm Miner Ready to Order
by
philipma1957
on 28/06/2016, 11:54:14 UTC
Has anyone tried to switch the stock fans of the S9, with Noctua F12 3000 RPM? If you can share thought or even results?


it will not work.  do not try it.

I tried it on the s-5 no go and on the s-7.

http://www.homedepot.com/p/12-in-x-25-ft-Insulated-Flexible-Duct-R6-Silver-Jacket-F6IFD12X300/100182573

put it in the duct above.

 lower clock to 500 manually set fans to 60%  

watch your temps  65- 95 is good

so if you are too hot lower clock to 475.  good luck


                                                                                               psu
                                                              <<<<<20ft>>>>>     wires
______________________________________________________ V____________

                                                                        <<<< air flow   miner   <2 feet>
____________________________________________________________________

Is this helping with the noise? and what is your ambient temp?

 


this did wonders for my s-7's running in my garage last winter.
my current setup does not use these as I am partners in a solar array. I provide the miners buy solar provides the power

current s-9 and solar array
https://bitcointalk.org/index.php?topic=1512186.0
https://bitcointalk.org/index.php?topic=1369207.0

To find my s-7 sound proofing threads will take time.

https://bitcointalk.org/index.php?topic=1188217.0
Found it for you