My new S9B3 is now pointed at KANO. 
Unfortunately it popped a breaker in my miner room causing me to have to unplug an S7.
I guess I'll have to put the S9 on a Bitmain 240 instead of the two HP PSU's and move one of the S7's to another room.
My speed on the S9 appears a little below spec and the HW errors on one board are much higher than the other two. Board three is currently much higher in HW errors.
EDIT: I had to pull the plug on the S9 as the temps on board 3 shot through the roof.
Time to move some hardware around.
Unfortunately it popped a breaker in my miner room causing me to have to unplug an S7.
I guess I'll have to put the S9 on a Bitmain 240 instead of the two HP PSU's and move one of the S7's to another room.
My speed on the S9 appears a little below spec and the HW errors on one board are much higher than the other two. Board three is currently much higher in HW errors.
EDIT: I had to pull the plug on the S9 as the temps on board 3 shot through the roof.
Time to move some hardware around.