I would disconnect the Hash Boards data & power connectors. Just connect power to the controller and ethernet to the Router. Power up and then hard reset the controller. If it does not show after that then most likely you have a faulty controller.
Rich
Thanks for this advice, I was actually going to try this today. Im going to test another PSU on another router to see if it connects there (maybe issue with my router) and if nothing, im going to try this.
**EDIT**
Tried it, no luck. Brought it over to my gfs and her router is setup under 192.168.0.1 and no luck on that router either. I DO get a different blinking pattern on the miner though, the Orange and Green LEDs blink at the same time, at same pace on that router but when looking in the router settings it shows no connection. Resetting still does not work and nothing changes when power in the hashing boards and when their unplugged.