Re: Trying to make a list of the rx 480's hash rate power and settings etc.
Very easy to undervolt and handle the RX480 only using the WATTMAN,no need for additional tools.
Set Voltage to Core and Memory BOOOOTH MANUAL,let memory default voltage 1000 and clock it to 2200.
Then set frequencty to -15% and lower power states last 4 to 980,this is lowest you will get in gpu-z reading too,if you set lower than this you will get 1.0375 in Gpu-z.
With these settings you should have 27-27.5 Mh/s and much lower power consumption and heat
Set Voltage to Core and Memory BOOOOTH MANUAL,let memory default voltage 1000 and clock it to 2200.
Then set frequencty to -15% and lower power states last 4 to 980,this is lowest you will get in gpu-z reading too,if you set lower than this you will get 1.0375 in Gpu-z.
With these settings you should have 27-27.5 Mh/s and much lower power consumption and heat
yes and if you also use your pc for gaming like i do, you can make a special profile for the miner program and set the settings there instead of the global settings..
it will switch to those settings when you start mining and switch back to default when you stop.
yeah wattman seems to be good enough.. At the moment I have 49mh at 270 watts for entire 2 card system.
take 40 watts off for the pc I am at 230 watts for 49mh that is really good.
there is only one window there is possibility for a bad airflow, you need to redirect everything from that window
but it is a nice room for mining indeed, you can stack there, a little farm
but it is a nice room for mining indeed, you can stack there, a little farm
second set of windows
