Re: Trying to make a list of the rx 480's hash rate power and settings etc.
Very easy to undervolt and handle the RX480 only using the WATTMAN,no need for additional tools.
Set Voltage to Core and Memory BOOOOTH MANUAL,let memory default voltage 1000 and clock it to 2200.
Then set frequencty to -15% and lower power states last 4 to 980,this is lowest you will get in gpu-z reading too,if you set lower than this you will get 1.0375 in Gpu-z.
With these settings you should have 27-27.5 Mh/s and much lower power consumption and heat
Set Voltage to Core and Memory BOOOOTH MANUAL,let memory default voltage 1000 and clock it to 2200.
Then set frequencty to -15% and lower power states last 4 to 980,this is lowest you will get in gpu-z reading too,if you set lower than this you will get 1.0375 in Gpu-z.
With these settings you should have 27-27.5 Mh/s and much lower power consumption and heat
yes and if you also use your pc for gaming like i do, you can make a special profile for the miner program and set the settings there instead of the global settings..
it will switch to those settings when you start mining and switch back to default when you stop.
ill try this on my problem rig thanks